These series of instructions allows you to control the behavior of data acquisition drivers. They offer what it takes to start & stop communication, verify communication status, monitor and control various communication parameters as well as change some configuration elements.
The exact list of modes and capabilities vary depending on the data acquisition driver.
|
Instruction |
Action |
|
Communication control for the BACnet client driver. |
|
|
Communication control for most of the polling-based data acquisition drivers. |
|
|
Communication control for DDE exchanges with DDE server applications. |
|
|
Communication control for DDE exchanges with configured DDE server applications. |
|
|
Control file transfer services for data acquisition drivers. |
|
|
Communication control for PcVue client/server networking. |
|
|
Communication control for the LonWorks driver. |
|
| M60870_5 |
Communication control for the IEC 60870-5 client driver, IEC 101 and IEC 104. |
| M61850 |
Communication control for the IEC 61850 client driver. |
| MDNP3 |
Communication control for the DNP3 client driver. |
|
Communication control for the OPC client driver. |
|
| OPCUA | Communication control for the OPC UA client driver. |
|
Communication control for the SNMP Manager driver. |