Data acquisition
Alarms
Audit and diagnostic
Communication interfaces
Configuration environment
Data acquisition
DataVue/Data Export
Development kits
General
Historical data
HMI
Known issues
Other Products
PcVue installation
PcVue miscellaneous
Real time data
Sample projects
Scripting
Security bulletin
SnapVue
System
TouchVue
UDC
Upgrade issues
Useful tools
Version Information
EmVue v1
FrontVue 15
FrontVue 16
PcVue 10.0
PcVue 11
PcVue 11.1
PcVue 11.2
PcVue 12
PcVue 15
PcVue 16
PcVue 6
PcVue 7.00
PcVue 7.20
PcVue 8.00
PcVue 8.10
PcVue 8.2
PcVue 9.0
PlantVue 2.6
WebVue
[KB848] BACnet System Variables
Applies to: PcVue 11.2 only Summary: The method used for BACnet connectivity was changed for 11.2. The 11.2 help still contains status variable information for the previous connectivity method. The […]
[KB836] Problem when installing the BDS on Windows Server 2008R2
Applies to: PcVue 11.1 and earlier Summary: Problem when installing the BACnet Data Server on Windows Server 2008R2.Orginator: BO Details: After PcVue installation the the BDS is completely not installed. […]
[KB805] BDS Admin Error Message
Applies to: PcVue 11.1 and earlier Summary: BDS Admin Error Message Details: If you use the Startup Type Automatic for the BACnet DataServer service you may, under some conditions, see […]
[KB781] LonWorks Optimization
Applies to: All PcVue versions with LonWorks communication Summary: The first step to optimize your LonWorks communication Details: 1. In project settings you must ensure that the property Permanent […]
[KB724] SAIA Solution not to install the full PG5 suite
Applies to: Any PcVue version Summary: Making the SAIA driver works without installing PG5 suite Details: In order for the driver SAIA to work it is mentionned in the help […]
[KB733] Double mapping on a CIMWAY frame
Applies to: PcVue 10.0 SP1, 11.0 onwards Summary: Double mapping on a CIMWAY frame.Originator: EM Details: It is now possible to map two variables to the same item […]
[KB684] BACnet – Segmentation feature
Applies to: All PcVue version Summary: This article describes how the segmentation of BACnet messages works and how to manage it with Pcvue. Details: The segmentation is the possibility to […]
[KB688] Windows does not support Net DDE anymore.
Applies to: Windows XP and later. Summary: From Windows XP operating system, there is an uncompatibility issue regarding NetDDE. Details: NetDDE was removed from Windows XP, but was still available […]
[KB679] How to configure Twincat Protocol
Applies to: All PcVue Versions including Twincat Protocol Summary: You will find attached, documentation explaining how to implement Twincat Protocol in PcVue Download attachments: Protocol TwinCATv1.2
[KB656] UCPT and SCPT variables
Applies to: PcVue all versions Summary: his article explains how to read Lonworks UCPT and SCPT tags from an equipment. Details: There are two methods : Using the SCADA verb […]
[KB652] COV limitation
Applies to: PcVue all versions.The BACnet implementation from PcVue version 11.2 onwards uses different technology to which this article is not applicable. Summary: Sometimes PcVue can no longer subscribe to […]
[KB653] BACnet Port conflict
Applies to: PcVue all versions.The BACnet implementation from PcVue version 11.2 onwards uses different technology to which this article is not applicable. Summary: The BACnet protocol, as with other protocols, […]
[KB651] How to use priority in the PcVue Modbus redundancy
Applies to: PcVue version 10.0 SP1 onwards. Summary: This article describes how to use priority in PcVue Modbus redundancy. PcVue Modbus TCP is able to manage redundancy of up to […]
[KB622] Using a Digi portserver with PcVue
Applies to: PcVue version 10.0.The basic content of this article may also be applicable to other versions of PcVue although the detail may vary. Summary: This article describes the problem […]
[KB625] How to optimize/increase communication speed with a PLC
Applies to: PcVue all versions. Summary: How to improve communication when the status is e000. Details: A communication status of e000 means that frames are being scanned at a slower […]
[KB628] Communication with a Siemens S7-1200/1500
Applies to: PcVue version 10.0.The basic content of this article may also be applicable to other versions of PcVue although the detail may vary. Summary: How to communicate with a […]
[KB602] BACNet Configuration in PcVue
Applies to: PcVue version 10.0 SP1 to version 11.1.The BACnet implementation from PcVue version 11.2 onwards uses different technology to which this article is not applicable. Summary: The way in […]
[KB584] EDE file structure
Applies to: PcVue version 9.0 SP1 onwards Summary: As there is no standard to define structure of the EDE file, automation manufacturer provides their own EDE files. In some […]
[KB598] BDSAdmin and DEMO MODE
Applies to: From PcVue version 9.0 to 11.1The BACnet implementation from PcVue version 11.2 onwards uses different technology to which this article is not applicable. Summary: Why is the BdsAdmin […]
[KB559] S7 ISO Error codes
Applies to: PcVue vesion 10.0 only Summary: The error codes, in the help for version 10.0 of PcVue, for the IP ISO S7 protocol are out of date. The following […]
[KB553] BACnet over LonTalk
Applies to: PcVue version 9.0 to version 11.1.BACnet communication in PcVue version 11.2 onwards uses different technology to which this article is not applicable. Summary: BACnet devices (equipment), connected via […]
[KB536] Modbus Plus Protocol
Applies to: PcVue version 10.0 (Build 2476) Summary: This article explains how to use Modbus Plus protocol with PcVue 10.0. Details: The Modbus Plus driver is not supplied with PcVue […]
[KB519] BACnet : variables status
Applies to: PcVue version 9.0 onwards.The BACnet implementation from PcVue version 11.2 onwards uses different technology to which this article is not applicable. Summary: You will find below, a reminder […]
[KB438] Warning about watchdog treatment
Applies to: PcVue all versions Summary: Watchdog treatment configuration. Details: Please note that watchdog treatment MUST ONLY BE USED with EQUIPMENT variables. Using the watchdog treatment with other variable source […]
[KB430] 64 bit floating point values using Open Modbus TCP/IP protocol
Applies to: PcVue version 8.2 SP2 and version 9.0 SP1.The basic content of this article may also be applicable to other versions of PcVue although the detail may vary. Summary: […]
[KB348] Communication Settings
Applies to: PcVue version 7.10c onwards. Summary: Possibility to temporize the invalidation of variables due to communication failure. Details: There is the possibility, since PcVue 7.10c, to temporize the invalidation […]
[KB352] Applicom QuickNote about communication errors when using an Ethernet protocol
Applies to: Applicom Summary: Applicom QuickNote on how to analyse communication errors when using an Ethernet protocol. Details: Please see attached file. Download attachments: QuickNote_ErrorHistory.pdf
[KB339] Applicom – Update for Applicom PC Network Interface Card
Applies to: PcVue all versions. Summary: This document describes how to update the Applicom software version. Details: The attached document is a Technical Note written by Applicom. Download attachments: TN_Update_for_Applicom_PCNIC_V109.pdf
[KB340] Applicom – PCI1500PFB and PCI1500S7 changes
Applies to: PcVue all versions. Summary: As from March 16 2006, all the Profibus Interface Cards PCI1500PFB (PN# APP -PFB-PCI-C, APP-PFB- PCI) and PCI1500S7 (PN# APP-PS7-PCI and APP-PS7 -PCI-C) are […]
[KB338] Applicom – Update for Direct Link PC Network Interfaces
Applies to: PcVue all versions. Summary: This document describes the compatibility between the DRL software versions and Windows’ versions.It also describes the options available according to the DRL software versions. […]
[KB316] Applicom – S7/xxx-2DP with S7 or DP messaging
Applies to: Applicom. Summary: Technical information to help with the configuration of an S7 PLC such as S7/315–2DP with an embeded profibus DP port on the CPU. Details: See attached […]
[KB292] Modbus IP and Network Behaviour
Applies to: PcVue all versions. Summary: Using Modbus IP, in network architecture, its possible for the client station to unexpectedly communicate directly with equipment. How? A variable is incorrectly configured […]
[KB293] Modbus TCPIP Protocols Block Length
Applies to: PcVue all versions. Summary: Modbus TCP/IP Protocols (Additional information) Details: The CIMWAY protocols Open Modbus Master and Open Modbus Slave support block size lengths that may exceed the […]
[KB300] Queue regulation
Applies to: PcVue version 9.0.The basic content of this article may also be applicable to later versions of PcVue although the detail may vary. Summary: This article describes how […]
[KB301] Applicom – OPC Redundancy (only available from V3.6.0, all cards & messaging)
Applies to: PcVue all versions. Summary: You need to change the target device during the process . Use OPC redundancy (swap.ini file & EQU_CHANGE item). Details: Benefits: 1srt OPC Server […]
[KB286] How to reverse a bit coming from PLC
Applies to: PcVue all versions. Summary: Some PLC programs use some bits in “Inverse logic”. We need to invert them for PcVue. Details: PcVue can do it automatically – but […]
[KB275] FIP and MODBUS+ communication information
Applies to: PcVue all versions.This article contains obsolete references. Summary: Possible methods for communicating using FIP or ModBus+. Details: We can connect PcVue to a FIP network with an Applicom […]
[KB264] How to relinquish a value with priority in bacnet object from Pcvue
Applies to: PcVue version 9.0 and the MBS OPC Server only. This article contains obsolete references. Summary: This article explains how to relinquish a value with priority in bacnet object […]
[KB265] Browsing OPC
Applies to: PcVue all versions. Summary: Eliminate in the browsing the OPC items for each properties supported by a variable. Details: Copy the file OPCDASVR.dat in the “C” folder of […]
[KB261] Applicom – Check the refresh period (Cyclic function)
Applies to: PcVue all versions. Summary: You need to know what is the refresh time (regarding the « System » or « User » cyclic functions). Solution :Add « /D » into the Visucyc properties. Details:
[KB260] Applicom – See the OPC traffic
Applies to: PcVue all versions. Summary: You need to check the OPC traffic between your client and the applicom OPC. Solution : Set the OPC server setting and AppOpc tools […]
[KB254] Security Issues with OPC DCOM in Windows XP
Applies to: PcVue all versions with support for Windows XP. Summary: This article describes how to avoid problems with logging in to Windows XP. Details: Source This article is based […]
[KB256] Cimway problem each hour due to Windows power management
Applies to: PcVue all versions. Summary: Disconnection of Cimway communication occurs every hour. Solution: New PCs are often provided with OS default settings for energy saving. These have to be […]
[KB243] The QUALITY field in OPC and the HDS
Applies to: PcVue all versions. Summary: This article refers to the format of the Quality field as defined in the specification of OPC Data Access 2.05a. Details: Please find the […]
[KB72] Identifying network errors with DCOM
Applies to: PcVue all versions. Summary: This article describes how to identify a network error in an application using OPC and DCOM. Details: If the first four digits of the […]
[KB64] Open Modbus TCP/IP Master Protocol – Benchmarks
Applies to: PcVue versions 7.20d SP1, 8.00 SP5, 8.10 and later.This article contains obsolete references. Summary: This article presents some test results from a project communicating via Modbus IP master […]
[KB63] Communicating with a TWIDO device via Modbus TCP/IP
Applies to: PcVue all versions. Summary: This article gives some tips for communicating with a TWIDO programmable controller from Schneider Electric via the Modbus TCP/IP protocol. The tips are as […]
[KB64] Using SAIA SBUS protocol with PcVue
Applies to: PcVue all versions supporting Windows 95 and the SAIA protocol.This article contains obsolete references. Summary: This articles provides additional information about SAIA SBUS protocol for PcVue under Windows […]
[KB54] How to launch PcVue automatically from Applicom
Applies to: PcVue all versions.This article contains obsolete references. Summary: This article explains how to launch automatically PcVue from Applicom when starting Windows NT. Details: When executing the command PCINIT, […]
[KB65] PcVue/TSX MICRO(37xx) with Unitelway driver
Applies to: PcVue version 6.04j onwards.This article contains obsolete references. Summary: This article explains how to connect PcVue and a TSX MICRO(37xx) with Unitelway driver using a serial port and […]
- 1
- 2