Back

Topic

[KB146]Logging of Alarm Acknowledgements

Tags: Alarm, Scada Basic, Scripting

Scripting
16 years ago
By RM
Options
Print
Applies to:

PcVue version 6.04d onwards.
Summary:

This article describes how to attribute alarm acknowledgement from SCADA Basic to the current user.
Details:

It is possible to acknowledge alarms from SCADA basic but, by default, the acknowledgement User Action is not logged.

Note

The Alarm Status is logged.

Solution

To enable the logging of alarm acknowledgement by SCADA Basic, as if it was done from an Alarm Viewer, use the following instruction.

To enable logging:

SYSTEM(“OPERATORMODE”,1);

To disable logging:

SYSTEM(“OPERATORMODE”,0);

Created on: 05 Nov 2010 Last update: 13 May 2024