HMI
Alarms
Audit and diagnostic
Communication interfaces
Configuration environment
Data acquisition
DataVue/Data Export
Development kits
General
Historical data
HMI
Known issues
Other Products
PcVue installation
PcVue miscellaneous
Real time data
Sample projects
Scripting
Security bulletin
SnapVue
System
TouchVue
UDC
Upgrade issues
Useful tools
Version Information
EmVue v1
FrontVue 15
FrontVue 16
PcVue 10.0
PcVue 11
PcVue 11.1
PcVue 11.2
PcVue 12
PcVue 15
PcVue 16
PcVue 6
PcVue 7.00
PcVue 7.20
PcVue 8.00
PcVue 8.10
PcVue 8.2
PcVue 9.0
PlantVue 2.6
WebVue
[KB1121] Impossible to see the Variable selector
Applies to: PcVue 10 to PcVue 12 Symptom: On a working project we add a new screen, then after some modifications the following problems may appear:– The variable selector opened […]
[KB857] RUN-TIME COLOR PICKER
Applies to: All versions of PcVue Summary: A sample project implementing a run-time color picker. Originator: LM Details: A sample project which allows the user to select a color from […]
[KB861] CHANGING AN IMAGE USING VBA
Applies to: PcVue 11.1 update and PcVue 11.2 update onwards Summary: A new VBA method, SetImage, allows the image file used in the Image drawing element to be changed programmatically.Originator: […]
[KB851] Displaying Timestamp Quality in the HMI
Applies to: PcVue 11.2 and later Summary: How to display timestamp quality in the HMI.Originator: ND Details: With some protocols the data is timestamped at the device. This is particularly […]
[KB806] Entering and displaying non-latin characters
Applies to: PcVue all versions Summary: The purpose of this article is to explain how to enter and display non-latin characters in PcVue. That is, those characters not available from […]
[KB803] Incompatibility of the AITimer between PcVue 10.0 SP2 and 11.1
Applies to: PcVue 10.0 SP2 and 11.1 Summary: The AITimer of version 10.0 SP2 is incompatible with the AITimer of version 11.1.Originator: ND Details: If you install 10.0 SP2 on […]
[KB802] Workaround for the loss of layer information when copy pasting a drawing element
Applies to: PcVue all versions Summary: When you copy and paste a drawing element in the HMI, the layer configuration of the original drawing element is not reproduced in the […]
[KB798] How to convert a project from a single screen to a dual screen
Applies to: PcVue all versions Summary: The following information can be used as the starting point for converting an existing single screen project into a dual screen project.Originator:LM Details: PcVue […]
[KB795] Using an AIGrid based utility to select special characters for display in the HMI
Applies to: PcVue 11.1 and later Summary: This utility (using a mimic containing an AIgrid, and a SCADA Basic program) allows you to create strings of characters that can copied […]
[KB767] Large on-screen keypad using mimic
Applies to: PcVue 11.1 Summary: Example of an on-screen key pad created with a mimic and driven by SCADA Basic Details: An on-screen numeric keypad using a mimic and SCADA […]