Communication interfaces
Alarms
Audit and diagnostic
Communication interfaces
Configuration environment
Data acquisition
DataVue/Data Export
Development kits
General
Historical data
HMI
Known issues
Other Products
PcVue installation
PcVue miscellaneous
Real time data
Sample projects
Scripting
Security bulletin
SnapVue
System
TouchVue
UDC
Upgrade issues
Useful tools
Version Information
EmVue v1
FrontVue 15
FrontVue 16
PcVue 10.0
PcVue 11
PcVue 11.1
PcVue 11.2
PcVue 12
PcVue 15
PcVue 16
PcVue 6
PcVue 7.00
PcVue 7.20
PcVue 8.00
PcVue 8.10
PcVue 8.2
PcVue 9.0
PlantVue 2.6
WebVue
[KB89] Using two network cards
Applies to: PcVue all versions Summary: This article explains the redundancy with two network cards Details: This form of redundancy is of the ‘hot standby’ type: Connections are established and […]
[KB88] The system variables
Applies to: PcVue all versionsWhile the basic content of this article remains valid, details may have changed since it was written. Summary: The system variables indicate the state of connection […]
[KB87] Detecting breaks in connection
Applies to: PcVue all versionsWhile the basic content of this article remains valid, details may have changed since it was written. Summary: How to detect breaks in connection Details: Connection […]
[KB86] Advice on configuration
Applies to: PcVue all versionsWhile the basic content of this article remains valid, details may have changed since it was written. Summary: Configuring the transport protocol For the TCP/IP transport […]
[KB85] The NETBIOS interface
Applies to: PcVue version 7.10c onwards. From PcVue version 9.0 onwards the NETBIOS technology referenced in this article is supported for backwards compatability only. While the basic content of this […]
[KB84] How multi-station communication works
Applies to: PcVue version 7.10c onwards. From PcVue version 9.0 onwards the NETBIOS technology referenced in this article is supported for backwards compatability only.While the basic content of this article […]
[KB83] About multi-station communication
Applies to: PcVue version 7.10c onwards. From PcVue version 9.0 onwards the NETBIOS technology referenced in this article is supported for backwards compatability only.While the basic content of this article […]
[KB80] Using Schneider SCA72 Converter with APPLICOM SW1000SER SOFTLINK
Applies to: PcVue all versions.PlantVue all versions. Summary: This article describes a problem with using the Schneider SCA72 converter with APPLICOM SW1000SER SOFTLINK. Details: The SCA72 converter cannot be used […]
[KB77] Quality OPC flags for PcVue OPC Server
Applies to: PcVue 7.20a onwards. Summary: This article explains how to interpret the quality information provided by the PcVue OPC server. Details: Each OPC item is sent by the PcVue […]
[KB76] Refreshing Data Items from the EIB OPC Server
Applies to: PcVue all versions. Summary: This article describes how to refresh the values of variables from the EIB OPC Server, after communication is disconnected and reconnected. Details: When communication […]
[KB75] OPC warning icon
Applies to: PcVue version 6.10x only. Summary: This article describes a problem with the OPC warning icon in previous versions of PcVue. Details: A warning icon is a yellow sign […]
[KB74] Floating point variables from the Eurotherm OPC Server
Applies to: PcVue version 7.00 onwards.While the basic content of this article remains valid, details may have changed since it was written. Summary: This article describes how to retrieve analog […]
[KB73] Invalidity code for equipment and OPC variables
Applies to: PcVue version 7.10c onwards. Summary: The code NS FMT is now used instead of NS IEEE to indicate a format problem (interpretation) for a variable. Details: If PcVue […]
[KB71] Configuration for the Eurotherm LIN OPC Server
Applies to: PcVue 7.20a ENA Build 5648 onwards. While the basic content of this article remains valid, details may have changed since it was written. Summary: This article describes how […]
[KB70] Deadbands with Schneider OFS
Applies to: PcVue all versions.PlantVue all versions. Summary: This article describes how to configure the deadbands of Schneider’s Office Factory Server (OFS). Details: Deadbands with OFS Correct management of the […]
[KB69] Accessing an OPC WordBit variable in Schneider OFS
Applies to: PcVue all versions.While the basic content of this article remains valid, details may have changed since it was written. Summary: This article describes how to access a WordBit […]
[KB68] Using the DDE Applicom Server
Applies to: PcVue all versions. Summary: This article explains how to solve problems with unsigned variables of the DDE Applicom server and signed variables of PcVue. Details: For a register variable, the DDE […]
[KB67] How to Read a PcVue Variable from Excel with DDE Communication
Applies to: PcVue all versions. Summary: This article explains how to read a PcVue variable from Excel. Details: Solution for real-time values Enter =SV|DB!VariableName in the EXCEL cell. Replace VariableName […]
[KB66] DDE Connection between Excel 97 and PcVue
Applies to: PcVue all versions. Microsoft Excel 97. Summary: This article explains how to write a PcVue variable from Excel. Details: Write a VBA macro as shown below, in Excel. […]
- 1
- 2