Alarms
Audit and diagnostic
Communication interfaces
Configuration environment
Data acquisition
DataVue/Data Export
Development kits
General
Historical data
HMI
Known issues
Other Products
PcVue installation
PcVue miscellaneous
Real time data
Sample projects
Scripting
Security bulletin
SnapVue
System
TouchVue
UDC
Upgrade issues
Useful tools
Version Information
EmVue v1
FrontVue 15
FrontVue 16
PcVue 10.0
PcVue 11
PcVue 11.1
PcVue 11.2
PcVue 12
PcVue 15
PcVue 16
PcVue 6
PcVue 7.00
PcVue 7.20
PcVue 8.00
PcVue 8.10
PcVue 8.2
PcVue 9.0
PlantVue 2.6
WebVue
[KB1216] Sofrel OPC UA Server Validation Results
Applies to: PcVue 16.1 and later Summary: This article contains the results from validation tests of the Sofrel OPC UA Server v2.20.27 and PcVue. Originator: ELCH Details: This guide contains […]
[KB1151] Windows Updates to enforce DCOM hardening – KB5004442
Applies to: PcVue and FrontVue – Multiple versions Summary: Microsoft has started rolling out Windows updates that could affect users of the OPC Classic technology, software components and products relying […]
[KB850] Sofrel OPC Server Validation Results
Applies to: PcVue 9.0 and later Summary: This article containes the results from validation tests of the Sofrel Server and PcVue.Originator: ACH Details: The attached document contains both the results […]
[KB576] Example of communication between remote OPC Client and PcVue
Applies to: PcVue all versions Summary: This article explains how to configure communication between a remote OPC client and PcVue. Details: Context : This configuration has been implemented with two […]
[KB459] OPC 3.0 Installation Error
Applies to: PcVue version 8.2 onwards. Summary: On some PCs, installation of the pre-requisite software for ‘OPC Core Components 3.00 Redistributables’ gives an error. With that installation blocked, it is […]
[KB301] Applicom – OPC Redundancy (only available from V3.6.0, all cards & messaging)
Applies to: PcVue all versions. Summary: You need to change the target device during the process . Use OPC redundancy (swap.ini file & EQU_CHANGE item). Details: Benefits: 1srt OPC Server […]
[KB297] OPC SERVER CONFIGURATION
Applies to: PcVue 8.2 SP2 and 9.0. The basic content of this article may also be applicable to later versions of PcVue although the detail may vary. Summary: This document […]
[KB265] Browsing OPC
Applies to: PcVue all versions. Summary: Eliminate in the browsing the OPC items for each properties supported by a variable. Details: Copy the file OPCDASVR.dat in the “C” folder of […]
[KB260] Applicom – See the OPC traffic
Applies to: PcVue all versions. Summary: You need to check the OPC traffic between your client and the applicom OPC. Solution : Set the OPC server setting and AppOpc tools […]
[KB254] Security Issues with OPC DCOM in Windows XP
Applies to: PcVue all versions with support for Windows XP. Summary: This article describes how to avoid problems with logging in to Windows XP. Details: Source This article is based […]
[KB243] The QUALITY field in OPC and the HDS
Applies to: PcVue all versions. Summary: This article refers to the format of the Quality field as defined in the specification of OPC Data Access 2.05a. Details: Please find the […]
[KB241] Communication between Applicom’s OPC Server and a PLC
Applies to: PcVue all versions. Summary: This article describes how to overcome problems with communication between Applicom’s OPC Server and a PLC. Details: Access to values in a PLC In […]
[KB80] Using Schneider SCA72 Converter with APPLICOM SW1000SER SOFTLINK
Applies to: PcVue all versions.PlantVue all versions. Summary: This article describes a problem with using the Schneider SCA72 converter with APPLICOM SW1000SER SOFTLINK. Details: The SCA72 converter cannot be used […]
[KB78] Unity versions for Smart Generator
Applies to: PcVue 8.00 onwards.While the basic content of this article remains valid, details may have changed since it was written. Summary: This article defines the versions of Unity that […]
[KB77] Quality OPC flags for PcVue OPC Server
Applies to: PcVue 7.20a onwards. Summary: This article explains how to interpret the quality information provided by the PcVue OPC server. Details: Each OPC item is sent by the PcVue […]
[KB76] Refreshing Data Items from the EIB OPC Server
Applies to: PcVue all versions. Summary: This article describes how to refresh the values of variables from the EIB OPC Server, after communication is disconnected and reconnected. Details: When communication […]
[KB75] OPC warning icon
Applies to: PcVue version 6.10x only. Summary: This article describes a problem with the OPC warning icon in previous versions of PcVue. Details: A warning icon is a yellow sign […]
[KB74] Floating point variables from the Eurotherm OPC Server
Applies to: PcVue version 7.00 onwards.While the basic content of this article remains valid, details may have changed since it was written. Summary: This article describes how to retrieve analog […]
[KB73] Invalidity code for equipment and OPC variables
Applies to: PcVue version 7.10c onwards. Summary: The code NS FMT is now used instead of NS IEEE to indicate a format problem (interpretation) for a variable. Details: If PcVue […]
[KB72] Identifying network errors with DCOM
Applies to: PcVue all versions. Summary: This article describes how to identify a network error in an application using OPC and DCOM. Details: If the first four digits of the […]
[KB71] Configuration for the Eurotherm LIN OPC Server
Applies to: PcVue 7.20a ENA Build 5648 onwards. While the basic content of this article remains valid, details may have changed since it was written. Summary: This article describes how […]
[KB70] Deadbands with Schneider OFS
Applies to: PcVue all versions.PlantVue all versions. Summary: This article describes how to configure the deadbands of Schneider’s Office Factory Server (OFS). Details: Deadbands with OFS Correct management of the […]
[KB69] Accessing an OPC WordBit variable in Schneider OFS
Applies to: PcVue all versions.While the basic content of this article remains valid, details may have changed since it was written. Summary: This article describes how to access a WordBit […]